Solution–measures to be taken to avoid cardboard burst
1. Strictly control the moisture content
This is the main thing. To control the moisture content, necessary measures must be taken during the entire process from the storage of the pre-roll box to the delivery of the finished product:
a. When the cigarette box is put into the warehouse for inspection, the moisture content of the cigarette box must be strictly controlled within the range specified by the national standard and the industry standard before it can be put into the warehouse;
b. After the cigarette box is put into storage, it is best to use it before the season to prevent the fatigue of the paper from reducing its strength, and it is strictly forbidden to accumulate it for a long time, which will have an impact on various physical indicators of the hemp box;
c. When the cigarette box is put into production and use, it is necessary to give full play to the functions of the preheater and the preconditioner: when the moisture content of the base paper is high, the wrapping angle of the hemp box on the preheater can be appropriately increased to increase the heating area, and the operation can be reduced if necessary. When the moisture content of the cigarette box is low, the wrapping angle of the joint box on the preheater can be appropriately reduced to reduce the heating area or not preheat, so that the moisture content of the cigarette box is appropriate; when the moisture content of the hemp box is too low , the preconditioner can be used to spray water vapor, and preheat properly to make the moisture content appropriate. Generally, the moisture content should be controlled at 6% to 8%.
d. Control the relationship between the temperature of the hot cylinder and the running speed, and adjust it according to the paper basis weight (gram weight) and grade of corrugated cardboard, the number of cardboard layers, and the corrugated type;
e. After the cardboard is offline, it must be put into the next process within the specified 8 hours to prevent the loss of water due to excessive stacking; then if the cardboard is sold from the factory, it is best not to expose the cardboard to the open air and ventilation during the dry season. A smooth environment, and after delivery to the customer, the customer should be informed to pay attention to protection and use it in time to avoid water loss in the later period and lead to explosion.
f. Use low temperature and low pressure production mode to reduce the temperature of the hot plate and related preheating cylinders; thereby reducing the water loss of the base paper itself, protecting the fiber toughness and moisture content of the base paper itself; it can greatly reduce the occurrence of corrugated cardboard bursts; Click to learn more [Breakout] The season of explosions is coming, and if you do these 6 points, the hemp box will never explode! A low temperature adhesive that can relieve burst wires!
Post time: Oct-24-2022
