Menene zan yi idan akwai fari a cikin bugu na kwali?

A cikin cikakken shafi na nau'in bugun sama, koyaushe za a sami ɓangarorin takarda da ke manne da farantin, wanda ke haifar da zubewa. Abokin ciniki yana da tsauraran buƙatu. Alamar daya ba zata wuce tabo guda uku ba, kuma tabo daya ba zai wuce 3mm ba. Bai dace ba don cire dandruff tare da manne kraft. A koyaushe yana buƙatar rufewa don goge farantin sau da yawa, kuma dole ne a fitar da kayayyaki da yawa marasa lahani, wanda zai haifar da asara ga kamfanin. Nemi mafita mai kyau! ! ! akwatin rajistar cakulan duhu

Shawarar mafita: godiva akwatin cakulan

Na daya: Shin confetti din da aka yanke da wuka mai yankan gashi? Idan yana yiwuwa a ƙara fan a madaidaicin takarda, zai yi tasiri; godiva cakulan zuciya akwatin

Na biyu: Da farko, dole ne mu fara daga tushe, dole ne a inganta kwali! An nannade abin nadi na ciyar da takarda da tef, kuma an rataye babban sigar jiki akan saitin bugu na farko, kuma alamar ruwa shima zai canza a baya! A ƙarshe, har yanzu muna buƙatar ingantawa daga kwali; lind cakulan kwalaye

Na uku: Ana sanya wuka mai yankan tsinke na layin samarwa tare da fanka mai shaye-shaye don cire kura, sannan a rufe na’urar ciyar da takarda da tef mai gefe biyu, sannan an rufe wani fim mai rataye fanko da tef mai gefe biyu. , An rataye a kan abin nadi na rukunin farko na rukunin bugu, kuma an nannade shi da wani zane Ana amfani da sitaci akan tef mai gefe biyu, kuma idan bai yi ba.'t aiki, kwali zai gudana a baya kuma ya cire ƙura… kananan cakulan akwatin kyaututtuka

Hakanan zaka iya samun kamfani mai yin faranti don yin farantin varnish mai girma. Lokacin yin farantin, ana iya amfani da tsarin ƙaddamarwa don cimma tasirin cire ƙurar lantarki, sa'an nan kuma sanya guga na ruwa don buga sashin farko na bugu. Kawai goge ƙurar da ke cikin farantin.kananan akwatin kyautar cakulan

Hudu: Saka takarda a kan na'urar bugawa kuma sake buga shi, tasirin zai fi kyau; akwatunan kyaututtukan cakulan

Biyar: abubuwa biyar da za a fara akwatin kyautar cakulan bayarwa

1 Shigar da na'urar lantarki a cikin sashin ciyar da takarda, layuka 7 na goge baki, cire ƙura da injin tsotsa. akwatin kyautar cakulan

2 Yi diluent akan farantin ɗigo na raga 100 don liƙa ƙura da datti akwatin kyauta cakulan

3. Sarrafa datti da ƙura akan layin kwali don ganin ko takardar da aka yanke tana da bursu masu tsanani

4 Har ila yau, akwai ko na'urar buga ita kanta tana tsabtace yadda ya kamata. Ana sanya ƙurar da ke kan na'ura zuwa kwali da farantin bugawa yayin aikin bugawa.

5. Ya kamata a tsaftace muhallin da ke kusa da na'urar bugu da kyau, ba makawa za a tsotse shi a cikin injin kuma ya haifar da datti;

Shida: Sauya goga na ɓangaren ciyarwar takarda da sabo, kuma rage tsayin goga! Kunna abin nadi na ciyar da takarda tare da tef mai gefe biyu na rawaya! Idan har yanzu bai yi aiki ba, juya kwali kuma kunna shi tare da takarda yana fuskantar ƙasa kafin bugawa!

Bakwai: Ana tsotse goga ta hanyar lantarki kuma yana manne da abin nadi, sannan zaku iya la'akari da ƙara ƙungiyar kawar da kura kafin bugu, adana lokaci da ƙoƙari…